WINEARM15X

Wine unit with built-in heating function.

EC10 WINE is a new wine unit with both cooling and heating function.

The heating element switches on when the temperature in the wine room drops below the set storage temperature.

The wine cooler is intended for self-built rooms in wood and Thermocold’s element cooling rooms from 2 – 12 000 liters.

The models have a dust filter for quick and easy maintenance.

New installations must be mounted with plastic cover or ventilation greats. This is purchased separately.

Read more →

This will also add the following products to your cart:

  • Environmental fee
Category:

Description

Wine Arm 15X Ceiling unit for wine rooms up to 15m3

Wine cooler from WineMaster in France.

Wine Arm 15 is for use for integration into the ceiling, it is lifted up and into the ceiling from inside the wine room.

The wine cooler is intended for self-built wooden cold rooms or Thermocold’s ready-made elements for wine rooms from 2 – 15,000 liters.

The models have dust filters for quick and easy maintenance.

NB! For new installations, there are various additional equipment for guiding air in and out on the warm side. This is purchased separately.

The room above where the compressor is placed must be soundproofed to reduce the sound image and ventilated correctly. Remember the drain for condensation water.

The cooling units are ranked according to a cold room made up of our cold room elements with Thermocold cold room door.
Volume is given in liters, with up to maximum size.

Cooling rooms built of elements: Cooling rooms made of elements have better insulation capacity than one cold room built in wood. Our 5cm thick cold storage meter equals 10cm with insulation. Here one does not have to think about how the room should be built up. Thermocold’s cold room elements are quick to assemble and have a surface that prevents bacteria from multiplying.

Cooling rooms built in wood: Make sure the room is built according to NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built in wood. Requirements for insulation are laid in floors, walls and ceilings. See more information about building here: Build your own cold room

Ambient temperature indicates the application area of ​​the cooling unit / cold room. At lower temperatures that can occur in e.g. cold basements, garages etc. you need winter control for the unit to have optimal operation or not damage.

NB! Various refrigeration doors, worn door gaskets, glass panels or glass doors in the room will require different calculation of performance, contact us or a dealer to evaluate the performance of the refrigerator.