Description
C25X wine, wall unit for wine rooms up to 25m3
Wine cooler from WineMaster in France.
C25vin is for use in recessed walls; it is lifted up and threaded into the wall from inside the wine room.
The wine cooler is designed for self-built wooden cold rooms or Thermocold’s ready-made elements.
for wine rooms from 5 – 25,000 liters.
The C25 comes in 3 different models:
C25X: Cooling only
C25SX: Cooling and heating
C25SRX: Cooling, heating and heating belt (for use in low ambient temperatures)
The models have dust filters for quick and easy maintenance.
NB! For new installations, the wall cannot be deeper than 150mm, for modifications, a maximum of 220mm, you need the hot side to face a room of a certain size for the unit to have sufficient air. Remember to drain for condensation water.
- Air-conditioning up to 25m3
- High performance integrated thermostat
- Quiet
- Respectful of the environment
- Ideal climate conditions for the preservation of your wine
A wine room should be built as a cold room, either in wood
or with cold room elements. Combine with glass door
and gas range. Use moisture barrier on the warm side according to NS. When built in wood.
Glass surfaces in the room must be sealed in case of a single case.
Materials such as plaster and MDF are not recommended in a wine room,
this is due to the moisture these materials attract.
NB! If one or more walls in the wine room are made of brick, rock, non-insulated glass or other non-insulated materials, these walls should be repaired before a wine cooler is put into use. If you are wondering whether your room can be used for wine storage, please contact our sales department.
NB! Cold rooms built of wood: Make sure that the room is built in accordance with NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built of wood. It sets out requirements for insulation in floors, walls and ceilings, as well as a moisture barrier on the warm side of the insulation. When using glass, we recommend a u-value of 1.2 or better.
Ready-made wine room panels with a hook system in the walls, floor and ceiling are always recommended for the best possible result. They are customized to your measurements by us and can be easily installed in a short time, using only the included key.
