Description
SP100vin, split unit for wine rooms up to 100m3
Wine cooler from WineMaster in France.
The SP100 series is a split machine for the wine room, it is mounted on the floor, inside the wine room.
Pipes with the refrigerant are laid through the wall from the inside of the wine room and out to the room on the outside,
Here a condenser is mounted on the wall and the pipes with the refrigerant are connected.
The wine cooler is intended for self-built cold rooms in wood or Thermocold’s finished elements
for wine rooms from 5 – 100,000 liters.
SP100 comes in the following versions:
SP100PRO is installed by a cold dismantler for copper pipes – Cooling and heating function
SP100-4 Comes with 4.5 meters of pipe with quick connection
SP100-8 Comes with 8 meters of pipe with quick connection
The models have dust filters for quick and easy maintenance.
NB! When installing the models SP100 4 and 8, good technical knowledge is required, the model SP100PRO
requires installation by an approved refrigeration installer, this is not included in the price. Remember to drain for condensation water.
NB! For new installations, the wall cannot be deeper than a maximum of 200mm, you need the hot side to face a room of a certain size for the unit to have sufficient air. Remember to drain for condensation water.
The cooling units are ranked according to a cold room made up of our cold room elements with Thermocold cold room door.
Volume is given in liters, with up to maximum size.
Cooling rooms built of elements: Cooling rooms made of elements have better insulation capacity than one cold room built in wood. Our 5cm thick cold storage meter equals 10cm with insulation. Here one does not have to think about how the room should be built up. Thermocold’s cold room elements are quick to assemble and have a surface that prevents bacteria from multiplying.
Cooling rooms built in wood: Make sure the room is built according to NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built in wood. Requirements for insulation are laid in floors, walls and ceilings. See more information about building here: Build your own cold room
Ambient temperature indicates the application area of the cooling unit / cold room. At lower temperatures that can occur in e.g. cold basements, garages etc. you need winter control for the unit to have optimal operation or not damage.
NB! Various refrigeration doors, worn door gaskets, glass panels or glass doors in the room will require different calculation of performance, contact us or a dealer to evaluate the performance of the refrigerator.
