TC10 FLEX – Cold Room up to 12 m3

The TC10 FLEX cooling unit uses up to 50% less power than traditional cooling units

The model is a replacement unit that fits a number of current and previously sold refrigeration units from various manufacturers.

Dimensions for up to 12000 liters are for element rooms with insulated floors. It must be taken into account how far the insulated cold room is when choosing the size of unit for your cold room.

SKU: 10151 Category:

Description

Thermocold TC 10 Flex cooling unit to be used in cold rooms up to 12000liter

The model is one replacement unit that fits in a number of current and previously sold models from different manufacturers.

Thermocold cooling unit is mounted from the inside of the cold room and through the cold room wall. One plastic cover is mounted on the outside of the cold compartment.

Light opening in wall: 440x650mm.

The unit fits into all light openings which are:

At least 16cm from the ceiling down into the cold room
Width from 440 to 560mm
Height: 650mm.

Do you have narrower / smaller light openings? Then you need to make the light opening to a minimum of: 440 x 650mm

Winter operating kits should be installed at colder temperatures below 16 ° C

 

Why choose Thermocold

  • Low on power consumption
  • Dust filter, easy maintenance
  • Low noise level and low vibration
  • 5 year warranty
  • Norwegian produced quality product
  • Eco-friendly cooling gas
  • Digital display for setting temperature
  • Best on service

The cooling units are ranked according to a cold room made up of our cold room elements with Thermocold cold room door.
Volume is given in liters, with up to maximum size.

Cooling rooms built of elements: Cooling rooms made of elements have better insulation capacity than one cold room built in wood. Our 5cm thick cold storage meter equals 10cm with insulation. Here one does not have to think about how the room should be built up. Thermocold’s cold room elements are quick to assemble and have a surface that prevents bacteria from multiplying.

Cooling rooms built in wood: Make sure the room is built according to NS (Norwegian standard) or better. NS sets the minimum standard for self-built cold rooms, which describes the correct construction of cold rooms built in wood. Requirements for insulation are laid in floors, walls and ceilings. See more information about building here: Build your own cold room

Ambient temperature indicates the application area of ​​the cooling unit / cold room. At lower temperatures that can occur in e.g. cold basements, garages etc. you need winter control for the unit to have optimal operation or not damage.

NB! Various refrigeration doors, worn door gaskets, glass panels or glass doors in the room will require different calculation of performance, contact us or a dealer to evaluate the performance of the refrigerator.

 

Asembly options

Installation can be done as bellow, carefully follow the installation instructions.

Option 7
TC 10 Flex / Self-built cold room with Plastic cover.

TC10 FLEX – Kjølerom opp til 12 m3 
Utvendig mål:B 570-D 230-H 787 mm
Lysåpning:B440 - H650 mm
Kjøleaggeregatet passer inn i lysåpninger som har følgende kriterier:
- Minimum 160mm fra taket og ned innvendig i kjølerommet
-Bredde fra 440 til 560mm
- Høyde: 650mm
Har du smalere/mindre lysåpninger? Da må du lage lysåpningen til minimum:: 440 x 650mm
Kjølemedie:R600A 106g
Strømtrekk:1,67 A 220-2240V 50Hz
Termostat område:3-20°C
Omgivelse temperatur:16-27°C
Vekt: 24 kg
Støvfilter: Ja
Fordamping av kondensvann:Ja